1p2t solid state rf switch specification sheet jfw model 50S-1505 jfw industries, inc. phone: 317-887-1340 sales@jfwindustries.com www.jfwindustries.com frequency range 20-2500 mhz configuration 1p2t impedance 50 ohms nominal vswr 1.4:1 maximum insertion loss 0.3 db typical 20-1000mhz 0.7 db maximum 20-1000mhz 0.5 db typical 1000-2000mhz 1.0 db maximum 1000-2000mhz 1.0 db typical 2000-2500mhz 1.5 db maximum 2000-2500mhz isolation 50 db typical 20-1000mhz 45 db minimum 20-1000mhz 40 db typical 1000-2500mhz 35 db minimum 1000-2500mhz switching speed 10 microseconds (50% ttl to 10% or 9 0% rf) rf input power 25 watts average 200 watts peak (1usec pulse) control logic (1 line) ttl low for common to j1 ttl high for common to j2 dc supply +12vdc to +15vdc @ 325 ma nominal +5vdc @ 40 ma nominal dc connector solder terminals rf connector sma, tnc or n female operating temperature range -20o to +70o c physical size see outline drawing 092-3022 07/31/2006 bac 07/31/2006 ecr/ecn # date rev appr / date ecr/ecn # dat e rev appr / date 15623 03/31/2008 a bac 03/31/2008 jfw form e-7-f rev f page 1 of 1
|